marksman

marksman

Well-Known Member
Full Member
Does anyone know the part number for the countersunk domed head bolts that fix the seat base frame to the runners (circled blue in the diagram) there are 3 per side I have 2 missing and 1 stripped

Any assistance welcomed as ever

upload_2019-1-25_13-40-51.png
 
I don't think they are separate parts but just part of the sub-frame assembly which is a single part on its own!

Someone else may disagree!
 
I know they are a PITA to get out, think I cut mine out/drilled when i repaired my runners.
 
Got mine out but 1 damaged and 2 weren't fitted previously ??
Don't suppose anyone has a scrap seat frame they can be removed from ?
 
If they are metric you should be able to get ones from a fastener place. Unless they have a special head...
 
Don't think the dome part would be critical or the crosshead.
Depends on the angle between the old and a new off the shelf one I suppose.
Countersunk stainless hex drive would look good if the angle is close.
 
You must log in or register to reply here.

Similar threads

19_Hue_95
Cynthia - 300tdi Project
Replies
8
Views
2K
19_Hue_95
19_Hue_95
Tonym3
Wanted Defender Passenger Seat base/runner
Replies
1
Views
557
vilguy
vilguy
J
Fitting rear mud flats to a 90
Replies
8
Views
1K
farmerlake
farmerlake
bankz5152
Stripped and Seized Screws/Bolts
2
Replies
37
Views
3K
Oldseadog
Oldseadog
F
another 90 in the family
Replies
15
Views
2K
elan23
elan23