S

steve-c

New Member

• Aug 28, 2012

• #1

Deep dish modulars with a 32mm offset.. is this too much of an offset.? will it induce wheel bearing failure..?

Ta Steve

 

Boris113

Well-Known Member

• Aug 28, 2012

• #2

I have my 285s on 16 x 8 modulars with a neg 32 offset. After a year of hard use, I've had no problems with wheel bearings -unlike the spacers that I had on previously.

 

wiltshire landyman

I’m back

• Aug 29, 2012

• #3

Wot size tyres u putting on them

 

S

steve-c

New Member

• Aug 29, 2012

• #4

I was hoping to put my BFG's on 265/75/R16's... Do you think they need to be wider ?

 

lucifus

Active Member

• Aug 29, 2012

• #5

How wide are the wheels? And where are you buying them?

 

S

steve-c

New Member

• Aug 29, 2012

• #6

16x10... on flee bay..or 16x8

 

lucifus

Active Member

• Aug 29, 2012

• #7

steve-c said:

16x10... on flee bay..or 16x8

Click to expand...

16x10 is probably too wide for 265. Do you have a link?

 

Mark L

Well-Known Member

• Aug 29, 2012

• #8

I'm guessing it'll be these people. Their prices are pretty good.

items in JCS 4x4 Wheels and Tyres store on eBay!

 

S

steve-c

New Member

• Aug 29, 2012

• #9

16 x 10 BLACK MODULAR DEEP DISH -32MM OFFSET 5.165.1 LANDROVER RIMS 4x4s | eBay

 

Boris113

Well-Known Member

• Aug 29, 2012

• #10

265s would be unsafe on a 10 inch rim, they are meant to go on a 7 inch. There is no reason why you can't fit them to an 8 inch (i think ), although you may increase your chances of pulling the bead off at low pressures. What reason are you wanting to fit wider wheels for?

 

wiltshire landyman

I’m back

• Aug 30, 2012

• #11

They wont fit safely 8" maybe but not a 10" rim