Skinny Mike

Well-Known Member

• Jul 27, 2018

• #1

How do
Just been out to the car and both front main speakers are dead.
Tweeters are working fine.
Rear speakers are working fine.
Tried altering fade/ balance etc, no difference.
Took head unit out and disconnected-reconnected the multi-plug. No difference.
Not going to take the door panels off tonight, I'm knackered.
Strange both front units have gone off together.

So any bright ideas?
Anyone got a pin diagram for the connector?

Cheers
Mike

 

kernowsvenski

Well-Known Member

• Jul 27, 2018

• #2

Mine failed within a couple of weeks of each other. Too much of a coincidence I thought but it was moisture in the doors that had done them in.

 

Nodge68

Well-Known Member

• Jul 27, 2018

• #3

No point in pulling the HU out as the tweeters are on the same wire as the main speakers.

The problem will be the main speakers failed.

 

Skinny Mike

Well-Known Member

• Jul 28, 2018

• #4

Looks like I'll have to take the door cards off, when it stops raining. At least it's a bit cooler now
Cheers
Mike

 

Skinny Mike

Well-Known Member

• Jul 28, 2018

• #5

Front speakers full of water in the back, drying out now, update later.
Mike

 

Nodge68

Well-Known Member

• Jul 28, 2018

• #6

Skinny Mike said:

Front speakers full of water in the back, drying out now, update later.
Mike

Click to expand...

Bin them as they'll be no use now. Then find a pair of quality replacements (I used JVC replacements) or find someone with some working second hand factory speakers.

 

Last edited: Jul 28, 2018

Skinny Mike

Well-Known Member

• Jul 28, 2018

• #7

Nodge68 said:

Bin them as they'll be no use now. Then find a pair of quality replacements (I used JVC replacements) or find someone with some working second factory speakers.

Click to expand...

Mates at his sons garage digging through his spares bin. Hopefully a freebie will arrive
Mike

 

Skinny Mike

Well-Known Member

• Jul 28, 2018

• #8

Well, put the original ones back in for the mo, now they're dry. All working again, but they need replacing.
Hopefully a set will turn up later.
Playing with my new toy now

Mike

 

teddywood1

Well-Known Member

• Jul 28, 2018

• #9

when I first had my face lift the speaks were not working except one so I took it strait back and LR said it was the wiring since they had them made in china they are thinner and not much use so they put new wiring in still the same old thinness but now are working and have done the last 5 years

 

DevonGuy

Well-Known Member

• Jul 28, 2018

• #10

Wot I done wiv mine woz rap em in plarstic all over the bak n bring them wyres outta da bottem. Keeps water out, see? Bloody worked, norl.