Little art

Little art

Active Member
Hello, after several miles of enjoyment first problems arrive as suspected it's a proper Landy alricht!

When buying this td5 2002 d2 first test drive showed the same problem. Not getting on speed and never reaching 4th gear (automatic )
Throttle is ok but not steady, it withdrawls/holds back at highest gear. Sometimes it's not even reaching third.
Read out computer is ordered but didn't arrive yet :(
My first guess is fuel, so what should stationary pressure be?
Maff sensor cleaning
Air flow sensor and clean the electric plug/connector where oil could get in.

Am i right on these first steps.
And yep English is sluggish 2 ;)

Grtzz from Holland where it is a bit chilly today,
 
Try disconnecting the MAF sensor and take it for a short run. I've just had to replace mine, cleaning didn't work, unplugging it made it better so a new genuine one went on and sorted it.

Check the wastegate can move freely.

Have you checked the level and condition of the ATF in the gearbox?
 
Maf is airflow or is that mass, always forget and throw these upside down in my thick head(not dyslectici at all ;p)

But did that, and now I am waiting for a towing truck to bring me home... Won't start at all :(
 
What I tried so far,
Loose maf sensor no result
Checked the wastegate, pulled of the lever and then the valve runs freely. Replacing back the lever needs a bit of force. Is it in need of adjustment?
Got it started again, went home and it shifted up to 2nd throttle was sine wave up and down. Hope tomorrow my Foxwell is arriving.... Any ideas are welcome.
Thx in advance
My mss and I didn't want any projects any more, then she bought this d2 hahaha
 
This, wastgate modulator I can not seem to find it anywhere?
Quick search and delivery here in Holland has bearmach parts.
I read prk 100130 right?
 
Little art said:
Hello, after several miles of enjoyment first problems arrive as suspected it's a proper Landy alricht!

When buying this td5 2002 d2 first test drive showed the same problem. Not getting on speed and never reaching 4th gear (automatic )
Throttle is ok but not steady, it withdrawls/holds back at highest gear. Sometimes it's not even reaching third.
Read out computer is ordered but didn't arrive yet :(
My first guess is fuel, so what should stationary pressure be?
Maff sensor cleaning
Air flow sensor and clean the electric plug/connector where oil could get in.

Am i right on these first steps.
And yep English is sluggish 2 ;)

Grtzz from Holland where it is a bit chilly today,
Click to expand...
You do know that the gear box electronics hold the selection of top gear until the gearbox temp is suitable, a bit of a pain I believe, if u wish to press on and it’s cold.
Then, sluggish selection of the ratios could be just down to that the ATF fluid hasn’t been been replaced for a while.
 
Discool, atf has been replaced and I I know the cold start thing.

Sieraferry, thnx starting there

Haha my vw t4 work van is showing same odd sluggishness it's epidemic :confused:
 
IMG_7398.JPG
IMG_7399 (1).JPG


This is what i get as read out, so first things first tomorrow is work, after that checking out the wiring harness to ecu for oil leakege plug on the motor side has no traces of oil, former owner said he exchanged it for a new one but he said a lot...
orderd a vacuum modulator ,just in case.
Tried to start it today, nothing.
startup sequence seems fine just no ignition or starter motor .
 
Frst of all erase those codes and try to start it then read again.... from those hystorical codes it seem sthat the crank sensor signal is problematic
 
sierrafery said:
Frst of all erase those codes and try to start it then read again.... from those hystorical codes it seem sthat the crank sensor signal is problematic
Click to expand...
Is that them speed faults, seems logical now you saying it. Steep learning curve these disco's seem to have. Had a rough day today at work, beautiful whether thoug ;) to morrow I have more time I hope thnx!
 
Hello,
After erasing all faults 2 things come up or can't be erased.
Engine and speed is out of bounds, it doesn't start neither.
Checked ecu for oil traces, it's clean.

Replace cranck shaft sensor?
Where can I find a parts list for this car?

Thanks upfront.

Greetings from Holland where life is weekendisch ;)
 
Well it's running again, replaced the crankshaft sensor. Old one came out in 2 pieces. Friday it is going to a nice land rover garage just round the corner the mechanic is going to explain some stuff and hopefully we get rid of the not shifting up ghost.

Keep u posted again
 
Haha, so we made us a list last Friday.
Ace valve block (underneath the car) needs mending, hight position sensors need replacement, front shocks need replacement (so it's getting a lift) , all oils will be exchanged. Is it wise to exchange rear air suspension just in case?

Rest of the car is as suspected in nice condition, filled the transfer box/shifty thing and shift's rather smooth now.

Keep u posted on the shift ghost though, as u know never trust a ghost ;)
 
You must log in or register to reply here.

Similar threads

bahteles
Disco 2 Discovery td5 auto cutting out after 2.500 rpm [Solved]
Replies
15
Views
4K
Steven Sheppard
S
kevinhenry
Bissell SpinWave Wet and Dry: Best Bissell Vacuum Cleaner for Automatic Cleaning
Replies
6
Views
2K
gold rover
gold rover
Little art
The list (04-D2) All solved :)
2
Replies
33
Views
2K
Little art
Little art
Little art
D2 td5 torque problem
2
Replies
23
Views
1K
Shimsteriom
Shimsteriom
Nardo90
200 TDI engine rebuilt and collected!!!!!!!!!!!!!!!! (plus back story, short version.)
Replies
14
Views
3K
Nardo90
Nardo90