S

Side-show-bob

Active Member

• May 24, 2012

• #1

Hi all

I have a gray leather interiour for a D1 if anyone is intrested i am open to offers before i put it on ebay. It dose include the 2 rear seats in leather too.

I will try and post pictures later.

Rob

 

Pikey

Dummy Ejection Facilitator..

• May 24, 2012

• #2

200 or 300?? 3 door or 5 door?? electric front seats or manual?? all info is crucial as non of em are interchangable. with out a lot of hassle..

 

S

Side-show-bob

Active Member

• May 24, 2012

• #3

oh i thought the 300 and 200 were the same.

It is from a 200 5 door. They are manual seats

 

JonnyP

Well-Known Member

• May 24, 2012

• #4

Location would be useful too..

 

S

Side-show-bob

Active Member

• May 24, 2012

• #5

I am located in Kent near Tonbridge

 

Pikey

Dummy Ejection Facilitator..

• May 24, 2012

• #6

Side-show-bob said:

oh i thought the 300 and 200 were the same.

It is from a 200 5 door. They are manual seats

Click to expand...

Nope they changed over with 300. main difeerence been they are wider and the setbelt catch is bolted to the seats

 

JonnyP

Well-Known Member

• May 24, 2012

• #7

Side-show-bob said:

I am located in Kent near Tonbridge

Click to expand...

I used to live in Leigh, near Tonbridge, but its too far away for me now..
Good luck with it..

 

300tdistu

Well-Known Member

• May 24, 2012

• #8

redhand said:

200 or 300?? 3 door or 5 door?? electric front seats or manual?? all info is crucial as non of em are interchangable. with out a lot of hassle..

Click to expand...

iv put 300tdi seats front and rear in a 200tdi before with no problems

 

Pikey

Dummy Ejection Facilitator..

• May 24, 2012

• #9

300tdistu said:

iv put 300tdi seats front and rear in a 200tdi before with no problems

Click to expand...

You have to make a plate up to fit the different seat mounts, 200 seats iare narrower and don't have seatbelt mounting on them.

I Never said it was impossible just an hassle,

 

300tdistu

Well-Known Member

• May 24, 2012

• #10

redhand said:

You have to make a plate up to fit the different seat mounts, 200 seats iare narrower and don't have seatbelt mounting on them.

I Never said it was impossible just an hassle,

Click to expand...

i didn't need to do any of that,
just unbolt from 300 and fit in 200, only hassle i had was a rusted bolt