D

discojosh1

New Member

• Wednesday at 18:05

• #1

Currently transferring the shifter + cdl unit from a d1 into my d2, but the cover for the transmission gear selector is completely stuck on with silicone. Won't even budge one bit. There also isn't much room to work with. Any ideas on how to get it off?

 

kevstar

Well-Known Member

Full Member

• Wednesday at 20:46

• #2

Heat it up with a heat gun & stick a bolt in the cover hole (not into the threads) & use the socket & extension for the ratchet to
prize it up. You might need a Stanley blade to cut into the join.

 

D

discojosh1

New Member

• Wednesday at 20:47

• #3

kevstar said:

Heat it up with a heat gun & stick a bolt in the cover hole (not into the threads) & use the socket & extension for the ratchet to
prize it up. You might need a Stanley blade to cut into the join.

Click to expand...

That's a good idea, I'll give it a shot tomorrow. Cheers

 

kevstar

Well-Known Member

Full Member

• Wednesday at 21:15

• #4

discojosh1 said:

That's a good idea, I'll give it a shot tomorrow. Cheers

Click to expand...

No worries pal let us know how ye get on.

 

D

discojosh1

New Member

• Thursday at 19:49

• #5

kevstar said:

No worries pal let us know how ye get on.

Click to expand...

Not the best. I can't post the video I took but when I try to pry the thing off, the entire transmission ends up moving, getting me nowhere. It genuinely feels like its stuck on some other way, but I can't think of how, or why.

 

Dippypud

Never Knowingly Understood

Full Member

• Thursday at 20:34

• #6

I've used dental floss to saw through silicone sealant before, but that was on a flat surface plate fixing ...

 

kevstar

Well-Known Member

Full Member

• Thursday at 21:35

• #7

discojosh1 said:

Not the best. I can't post the video I took but when I try to pry the thing off, the entire transmission ends up moving, getting me nowhere. It genuinely feels like its stuck on some other way, but I can't think of how, or why.

Click to expand...

You'll need to get a leaver under where the gate springs are & use brut force to break the seal.
Can you get a claw hammer under it, there is nothing else holding it on.