B

buffers

Member
Hi everyone, looking for some guidance , have been quoted £700 parts and labour to replace the front cv joints on my landy, which seems high, has anyone an idea of labour time and is it a difficult job. any help and advice would be great , specially to my wallet , many thanks
 
buffers said:
Hi everyone, looking for some guidance , have been quoted £700 parts and labour to replace the front cv joints on my landy, which seems high, has anyone an idea of labour time and is it a difficult job. any help and advice would be great , specially to my wallet , many thanks
Click to expand...
not that hard to do, as long as you have a few sockets and spanners, for the first time i would say 3-4 hrs job done parts should come to no more than £100-£150 tops, so save yourself £600 !!!!

CV Joint Kit - Defender non ABS with 23 internal splines£34.80Paddock Spares
 
Last edited:
I've just done mine. Factor in time and money for seized bolts corroded brake hose bracket, new ball joints (mine were seized). I had to replace the brake disk mud shields also and 1 stub axle
 
Ridiculous cost!

Its a fair bit of work but not exactly hard. Just lots of various sized bolts to undo.

Tho you will need a 52mm socket NOT box spanner + a torque wrench.
 
As above, not technically demanding, but expect some swearing. Bear in mind that there are a lot of parts that should be replaced along the way, hub nut, flange bolts, gaskets etc. Well worth going through the process in the RAVE and making a list. While you are in there you might also want to check your swivels for pitting and check the bearings for wear. Unless your sweeper seals are perfect I would swap them too.
 
I’ve just been quoted £900 for front half shafts and new cv joints on 2012 110! That’s for Ashcroft kit at around £650, then add your labour and vat!
Trouble is I’m no mechanic..........


Looks like I’ll become one?
 
Looks like I’ll become one?[/QUOTE]

Welcome to the site!, how you think we all ended up on here?:D

PS dont forget to put £10 to one side for the beers your treat yourself for saving yourself best part of £600!
 
It may seem daunting but CV swaps arnt hard.

Ideally need new brake caliper bolts - always use a 13 sided socket for these.

Land rover toolbox videos do some good vids on most landy repairs! Any help you need just shout.we will all reply!
 
  • Like
Reactions: 8ha
bankz5152 said:
It may seem daunting but CV swaps arnt hard.

Ideally need new brake caliper bolts - always use a 13 sided socket for these.

Land rover toolbox videos do some good vids on most landy repairs! Any help you need just shout.we will all reply!
Click to expand...
You must tell us where you buy the 13 sided sockets, lol
 
You must log in or register to reply here.

Similar threads

M
Best place to sell defender 90
Replies
2
Views
411
miktdish
miktdish
RobertJ
COC data Defender 90 Td5
Replies
0
Views
278
RobertJ
RobertJ
D
Changing TD5 Defender 90
Replies
4
Views
781
lightning
lightning
Crunky
90 TD5 Centre box delete problems
Replies
7
Views
433
Crunky
Crunky
stumpyj
(2000 TD5 90 defender)TD5 Fuel Pump
Replies
4
Views
363
stumpyj
stumpyj