hi all just got a nice p38 but the cruise is in-op the vac pipes on top of the n/s front wing is missing so this is y its in-op but i don't know how to pipe it up and where they go can any one help me please as iv nearly done all the fault now and this is one of the last ones to sort thanks jay
magictiny
New Member
Ok you have a pipe that runs from the brake pedal switch, through the bulkhead into the engine bay, it then runs along the bulkhead to where the cruise pump and bellows is, this ends in a T piece, two short pipes then run to the bellows and the vacume pump.
Try to get silicon tube from ebay - I did mine in blue so that it differs from all the other black tubes and pipes in the engine bay.
Hope this helps.
Try to get silicon tube from ebay - I did mine in blue so that it differs from all the other black tubes and pipes in the engine bay.
Hope this helps.
magictiny
New Member
Ok you have a pipe that runs from the brake pedal switch, through the bulkhead into the engine bay, it then runs along the bulkhead to where the cruise pump and bellows is, this ends in a T piece, two short pipes then run to the bellows and the vacume pump.
Try to get silicon tube from ebay - I did mine in blue so that it differs from all the other black tubes and pipes in the engine bay.
Hope this helps.
Try to get silicon tube from ebay - I did mine in blue so that it differs from all the other black tubes and pipes in the engine bay.
Hope this helps.
lol thanks pall iv got the two with the t in on the pumps just nothing coming off the t so that is the one to the brake pedal
