blue beasty
Leaks an prone to bits dropping off
Starter not immediately disengaging?
discomania
Well-Known Member
doodle bug
Well-Known Member
Make that four ! mine made the same noise !! new starter motor........
nunny.bdsc
New Member
yep starter motor if its a disco 200tdi in a 90 dont bother taking manifold off in order to get starter out from top,just use a scissor jack at bottom to push engine over the 5mm needed to get it past chassis and engine..
buckshot
Well-Known Member
thats a good idea , unless like mine the top bolt would'nt move
rounded head slightly ended up taking the manifold off and drive a under sized socket onto it came out sweet as a nut then 
Station House
Well-Known Member
Late to the party Ben, only just listened to the video - agreeing starter not disengaging as it should
Might just need a clean up, or there again they can be such a sod to get off you might want to just invest c£100 in a new one
Loving the video post, but takes out the fun of you describing the noise and us guessing
Might just need a clean up, or there again they can be such a sod to get off you might want to just invest c£100 in a new one
Loving the video post, but takes out the fun of you describing the noise and us guessing
Bayden_uk
Active Member
haha i know i was thinking how could i possibly describe that noise. then i just decided the easy option hahaLate to the party Ben, only just listened to the video - agreeing starter not disengaging as it should
Might just need a clean up, or there again they can be such a sod to get off you might want to just invest c£100 in a new one
Loving the video post, but takes out the fun of you describing the noise and us guessing
fo future members an nobies to landys such as my self this vid will be a god send
