D

danhutch

New Member

• Jun 22, 2014

• #1

Hey there, ive recently started a project to rebuild a series 3 from 2 donor cars and a chassis, and now its dawning on me that welding will be required at some point or another. Which leads me to a slightly odd question, is there any on in the midlands area that could give me a crash course in welding, or even just some kind of insight.

Kind Regards

Hutch

 

joe27979

Well-Known Member

• Jun 23, 2014

• #2

lots if vids on YouTube, for background reading try these:

Arc Welding Tutorial

How to MIG Weld - Tutorial

Learning to Weld

 

owl

Well-Known Member

• Jun 23, 2014

• #3

Your not far from me, pop over for a couple of hours. also read the tutorials posted above

 

ronsealdeath

Sagging Member

• Jun 23, 2014

• #4

Local colleges here do courses in evening for £80 a term or £200 for a more advanced one.

 

owl

Well-Known Member

• Jun 23, 2014

• #5

ronsealdeath said:

Local colleges here do courses in evening for £80 a term or £200 for a more advanced one.

Click to expand...

Yes they are very good, I did a 2 year city and guilds course. It was two evenings a week and the instructor was an retired Lloyds certificated pressure welder. We did gas, stick and mig plus metallurgy. beats watching tv and a pint after on the way home.

I will never forget watching the instructor doing overhead but welds with stick, perfect welds on both sides of the plate. He was pushing the rod through the gap and putting a bead on top then pulling it back and doing a bead underneath.

 

dominicbeesley

Well-Known Member

• Jun 23, 2014

• #6

A friend and I got in touch with Martin from MK Engineering not quite midlands but not too far. He gave us a two hour primer on MIG with a quick overview of TIG. Wasn't too expensive and he was a good teacher. Not too much ****ing around with H&S but just enough. We got stuck in straight away. A lot of these courses spend ages telling you a load of ****e you'd be better reading from a book / the net. What I wanted, and got, was someone to watch me do it and tell me where I was going wrong.

I wouldn't say my welding is good but its ok....I probably should go back for a refresher.

 

D

danhutch

New Member

• Jun 23, 2014

• #7

i will watch those vids and do some reading, when will you be free own and where are u based? can you inbox me?

 

D

danhutch

New Member

• Jun 23, 2014

• #8

p.s. thanks for the responses guys, more than helpful

 

owl

Well-Known Member

• Jun 23, 2014

• #9

pm sent

 

A

aaronledwidge

New Member

• Jun 27, 2014

• #10

What mig do you have, this will have a huge bearing as to how much of a struggle you can have.

Make sure you clean the metal as much as you can and use decent gas not co2. As for practicing use good clean steel watch some vids and play on a bench.

Mig welding.co.UK has a lot of good info too.