Jasee93

New Member
Hiya,
Just a quick question, does anyone know of any good lanes or 4x4 sites in cornwall? :D Heard there was/is a site on Baldhu?

cheers, Jase
 
Have a search on here chap, there are some around my way but I haven't done any yet.
 
Couple of us from off here meet up often and get stuck at Baldhu , your more then welcome to join us and pull chaz88 out :D
 
I wouldnt mind meeting up with u guys when you go laning, just been around some good lanes in Shropshire. Do u reckon that a standard Disco with A/T's would make it round any tracks at Baldhu :confused:
 
Yes easily mate there's see nice bits at baldhu and I'm only a shout away if you did get stuck
 
I wouldnt mind meeting up with u guys when you go laning, just been around some good lanes in Shropshire. Do u reckon that a standard Disco with A/T's would make it round any tracks at Baldhu :confused:

I'm going to Baldhu tomorrow think chaz is going as well if he's sorted out his truck

Your more then welcome to join us your disco will be fine there
 
I've got a 1983 88" S3 in blue. Only had it two weeks, not a huge amount to get her road worthy. Mostly welding and electrics, the electrics are the easy part for me, shocking at welding though :(

I don't have a clue about electrics ...mate of mine does all of mine
 
Luckily I'm an electrician by trade, thankfully I've spent enough time dabbling with cars, boats, trucks and planes, so the only thing I know I'm no good at is welding and spraying.

Chaz, is your friend interested in a bit of work? The landy is not MOTed at the most and need a patch welding in the drivers foot well and some box work on the rear cross member. Might need some at the top of the bulkhead around the vents. I'm hoping that just for the summer I can get away with it then strip it down this autumn and repair the bulkheads properly. I'm down Helston way if he is anywhere close?
 
Just Falmouth mate tbh though i don't think he has any gas in his welder atm I can check though
 
Just Falmouth mate tbh though i don't think he has any gas in his welder atm I can check though

Cheers, I'll probably put it in for an not once I have the electrics sorted and see what the MOT man wants done to make her legal and get the welding done, mind you, he probably might be a bit less observant if he see's patches already completed. :rolleyes:
 
I use Castle Motors in Helston, any recommendations? Does your mate work for a garage that I could take it to weld then Mot?
 
Na he doesn't he's actually a gardener now lol
I'd personally recommend tokins at United downs :)
They only mot don't actually do any work there so there not in it to make money if you know what i mean
 

Similar threads