C

county hunter

Member

• Jan 13, 2009

• #1

Hi All,
Whats the best way of doing the hoses from intercooler/turbo as I have put a 200tdi into my 90 is there a kit that covers them all?.

cheers
steve

 

wiltshire landyman

I’m back

• Jan 13, 2009

• #2

ebay £175

 

jai_landrover

Well-Known Member

• Jan 13, 2009

• #3

To be honest it sounds expensive but you Will spend more that that if you doi it neatly mine cost about 175 quid but that was before the ebay kit was available plus i had loads of spare parts to my disposal it really is the cheapest and easiest way. Jai

 

oil dripper

Well-Known Member

• Jan 13, 2009

• #4

yer know that steel security fencin they use on building sites

 

L

landrovermadness

New Member

• Jan 13, 2009

• #5

best place to get them from is steve parker conversions. and they fit prefectly..

 

B

boydy1989

Well-Known Member

• Jan 13, 2009

• #6

i spent a tenner on mine, fits perfectly.

Section of exhaust i was given for the top one, sorted.

Length of rubber pipe to extend the bottom one, about £9.

Some new jublee clips. Done.

I didn use the original air filter though.

 

C

county hunter

Member

• Jan 13, 2009

• #7

Thanks for all the replies I will try and sort them out in the morning.

cheers
steve

 

Patman1200

Active Member

• Jan 14, 2009

• #8

I used the kit from Dartons fabrications. £120, fitted lovely and looks good too.

 

oil dripper

Well-Known Member

• Jan 14, 2009

• #9

landrovermadness said:

best place to get them from is steve parker conversions. and they fit prefectly..

Click to expand...

really cheap on the pocket as well
:mooning: :mooning: :mooning:

discovery 200tdi into defender 90/110 conversion kit on eBay, also, Land Rover, Car Parts, Cars, Parts Vehicles (end time 18-Jan-09 12:33:39 GMT)

 

discojamz

Active Member

• Jan 14, 2009

• #10

we spent nothing on doing the pipework for mine