jacckk
Active Member
Hi,
I'm getting the following code from my HEVAC: "(32) Compressor clutch control circuit open or short to ground"
This only appeared after I removed the engine to rebuild it. I didn't have to de pressurise the air con to remove it only move the compressor to one side. I have the earlier system that doesn't use the external relay to drive the compressor clutch. I've also tested the clutch by applying 12V to it and it clicks in fine.
Is this likely to be due to lack of gas (it never blew that cold)? Or an actual fault with the clutch control circuit.
I'm getting the following code from my HEVAC: "(32) Compressor clutch control circuit open or short to ground"
This only appeared after I removed the engine to rebuild it. I didn't have to de pressurise the air con to remove it only move the compressor to one side. I have the earlier system that doesn't use the external relay to drive the compressor clutch. I've also tested the clutch by applying 12V to it and it clicks in fine.
Is this likely to be due to lack of gas (it never blew that cold)? Or an actual fault with the clutch control circuit.