You are on the right track with all of that, and myself I would remove the One Life Live it sticker as a matter of priority!
But that actually looks like a decent Ninety, that is a better roof than the later ribs inside, and it is pretty clean and straight apart from the bad mods.
Pics of the chassis and bulkhead would be interesting?
this sort of pic?
Turboman
Mab An Gov
That is better, but we cant really see any of the chassis. By which I mean the steel ladder frame on which the whole vehicle is assembled. Especially at the rear, around the outriggers, and spring hangers. Close up of the chassis under wheel arches etc. Bulkhead similar.
It is the level of rust on those components that really tells the value and lifespan of a Landrover.
thanks struggling with th I s site!Sending you a pm
Turboman
Mab An Gov
Steering bars and axle maybe looking a bit too clean. Maybe been waxoyled all over.
Diff guard looks ok, though!
Turboman
Mab An Gov
No!
You are doing much better than many. Often they rant on for hundreds of posts before posting a single pic!
Turboman
Mab An Gov
Don't think hard tops even had them at that time. Only on station wagons.
Marmaduke
Well-Known Member
Mine's a hard top with a rear wash wipe
Marmaduke
Well-Known Member
Have you got a rear wiper switch? Mine's next to the clock / cigarette lighter socket
Turboman
Mab An Gov
I have taken 31 pictures and cannot work out to get them on here!!!!No!
You are doing much better than many. Often they rant on for hundreds of posts before posting a single pic!
Marmaduke
Well-Known Member
Factory as far as I can tell, everything is standard using the proper loom, switch, washer jets and all the gubbins like that
Turboman
Mab An Gov
In that case what I said earlier is probably wrong. Think that may need to be reinstated for MOT.
Turboman
Mab An Gov
I am no expert on tech matters, quite the reverse. What I do is upload the pics to Photobucket and then post them. Maybe that is outdated now, but that is what I do.
Marmaduke
Well-Known Member
Depends on whether she's got the switch, pump and wiring cos it could just be a door from a different tratter
