mousemat said:
Update 2.

Looks to have a leaky airbag front left as that had gone down by 12 mm or so.
Click to expand...

The fronts are a nice easy job, rears a little harder. There is a guide in the tech archive on how to replace the bags or I can post a copy if it would help.
 
Both my P38's and all the other blocks & compressors I have seen are 6mm airline with BSP collet fittings each end. I doubt 8mm pipe would make much difference, because the air still has to go through small galleries in the block.

Besides, 6mm pipe maximum flow rate far exceeds what the 0.5 CFM pump can deliver !!
 
Mine is certainly 6mn from the compressor. I purchased some 6mm pipe and fittings prior to swapping out the compressor fitting so now have no need for them 😕

I'm just waiting for a delivery of the air bags and I'll be good to go
 
mousemat said:
I've not the luxury of a Garage Compressor sadly. Only the bog standard tyre inflator for the wheels. However, new pump will be here on Tuesday.

I have indeed ordered a repair kit so I will refurb the old and add it to my spares box.
Click to expand...

That'll do with an emergency inflation kit. Don't get the T piece ones. Straight connectors with valves and make sure they don't leak.
 
mousemat said:
I'll do the soapy water test when I fit the new one next week.

I've certainly had one airbag replaced during a service so I guess it won't hurt to have them replaced. Any recommendations as to what bags to go for?
Click to expand...

Dunlop, although they're all made in China now.
 
MGRmanic said:
I bought the Dunlop bags for £260 including the fixing kit and postage. Good value when you see what main dealers want.
Click to expand...
That's a good price. My issue was that I live in the Republic of Ireland which means having to pay import taxes as well as shipping
 
mousemat said:
That's a good price. My issue was that I live in the Republic of Ireland which means having to pay import taxes as well as shipping
Click to expand...

Made in China so I imagine there's a stockist somewhere in Eire or EU? Failing that, Arnott 2 are made in the EU although I think Dunlop ate more reliable these days, even if they are made under licence in China.
 
mousemat said:
That's a good price. My issue was that I live in the Republic of Ireland which means having to pay import taxes as well as shipping
Click to expand...

But you have to remember you don't pay the VAT on the goods, just the import duties which usually equal out. Many UK suppliers have got their act together and do "to your door" delivery where they deal with the paperwork so its just like it used to be, and to be honest the prices are about what they used to be.
postage is the thing, which is something we have to live with.

J
 
You must log in or register to reply here.

Similar threads

Goc3k
Discovery 1 SOLD 1997 300TDI manual D1, Winchester
Replies
16
Views
4K
Goc3k
Goc3k
R
I hate P38's so MUCH!!!
Replies
17
Views
3K
RangeRoller dt
RangeRoller dt
ar1g3
My 1999 Ranger Rover P38 4.0 V8
Replies
2
Views
1K
ar1g3
ar1g3
Kimbo 110
Defender 110 Defender 110 300tdi
Replies
2
Views
2K
Kimbo 110
Kimbo 110
Mph007365
1999 P38A 2.5D WHAT IVE DONE, WOULD I DO IT AGAIN?
Replies
4
Views
1K
Salisbury Nick
Salisbury Nick