discodrivercumbria
Well-Known Member
got a few faults, does anybody know what they mean in layman terms English?
i never knew that! but have never had any real faults with the other cars, cheersHi i think you are using a Hawkeye? if it is. you should have a DTC look up section on the menu.
In user menu section1 OBD DTC lookup use the left/right keys under the required DTC character then using the up/down keys to change the characters as required
press the (tick) key to confirm the DTC if it has the code in the memory it will give a short description of the problem. eg P0100 - mass or volume air flow A circuit
Press (x) to return to the menu (Sorry i do not have a list of fault codes but i have used a hawkeye)
hope this is a help good luck JIm
so what does that meanYou can forget about those obd2 codes retrieved with a generic scanner... most of them are false, youn can't diagnoe a Td5 withn obd2 scanners even if the vehicle is listed, period
thanks, i will give it a spin tomoz, 1st gonna try to see why the rear wiper and fuel flap dont work ,plus no oil light comes on, it does witrh hawkeyeSorry i missed that it's about hawkeye total cos the snapshots are a bit dark.. all those codes are about ACE...did you clear them, went for a drive then read again to get rid of hystorical codes ?, if all those codes are current then first step would be to replace the ACE relay R14 to rule it out