jamesmartin
Well-Known Member
choice of two and 1 doesnt appear to leak, id try slave
bolted to the gearbox
have a look in busters guides it may have slave cylinder replacement
blue beasty
Leaks an prone to bits dropping off
Its on your bell housing you will see a flexi pipe going to it, and yes anyone can do it ,the worst bit is laying on the ground go on pete you know you can
jamesmartin
Well-Known Member
yes if its brake fluid and not water 2 ways of doing it as is at moment but you will need some one to hold bottom securing bolt for cylinder inside car up near pedal ,or undo 6 x bolt in footwell holding pedal box on and remove box to swap cylinder off the car
jamesmartin
Well-Known Member
if your hands are ****ed
Oldseadog
Well-Known Member
When after using Swarfega, washing up liquid and washing powder, your hands are still covered in oily gunge that won't go away, and you still haven't done everything that's got to be done on your Landy, when your seat cover tells you to sod off and not go anywhere near her with 'those hands', you will have passed the first hurdle of becoming a fully fedged Landy-man!
OSD
