The clutch on my 90 with disco engine and box isn't releasing properly. When I depress the pedal it will release enough to stop the land rover moving however it is still trying to drive i.e. the clutch is being slipped and you can't change gear lol. Any advice as to what may be the issue would be much appreciated. Cheers people
simonm15
Member
Could be worth checking the master and slave cylinders to see if they are leaking/on the way out. I had similar trouble and had trouble changing gears one day, the next the slave had failed and lost all the fluid and my Landy stalled as I tried to reverse out the drive. Unfortunately the drive was on a slope so it was then also stuck in gear....
blue beasty
Leaks an prone to bits dropping off
If seals in master are gone you should be able to see the fluid washing about if you look in the reservoir.
Seized slave would give a hard pedal.
If your not losing fluid or pressure, there's no air in the system and its adjusted correctly I'd suspect the push rod or pivot pushing through the clutch arm.
Seized slave would give a hard pedal.
If your not losing fluid or pressure, there's no air in the system and its adjusted correctly I'd suspect the push rod or pivot pushing through the clutch arm.
