LRD90tdi
New Member
Hi all.
My old school father in law has a rather sick Pilot which I believe has an lt77 box and I'm going down there later to take the box out and find out whether the fork has snapped again (we replaced it in 08').
Can anyone confirm where the 'pin' from the fork should sit in relation to the edge of the bell housing?
I looked at it the other night when we took off the slave cylinder and it was flush with the casing - and to me that looked right??
He has fitted a new slave and master but cannot get a pedal after bleeding....
There's no signal at his and it will be a late one so I'll update in the morning!
Cheers
Tom
My old school father in law has a rather sick Pilot which I believe has an lt77 box and I'm going down there later to take the box out and find out whether the fork has snapped again (we replaced it in 08').
Can anyone confirm where the 'pin' from the fork should sit in relation to the edge of the bell housing?
I looked at it the other night when we took off the slave cylinder and it was flush with the casing - and to me that looked right??
He has fitted a new slave and master but cannot get a pedal after bleeding....
There's no signal at his and it will be a late one so I'll update in the morning!
Cheers
Tom
Last edited: