D davelin83 New Member Sep 8, 2013 #1 After a week of messing about my disco is now on the road. After doing the clutch my rev counter is now not working any ideas
After a week of messing about my disco is now on the road. After doing the clutch my rev counter is now not working any ideas
s0ftmick Active Member Sep 8, 2013 #2 The rev counter is controlled by a wire from the alternator on the passenger side of the engine Have a look and see if there is a lose wire and clip back to the alt and it should work!
The rev counter is controlled by a wire from the alternator on the passenger side of the engine Have a look and see if there is a lose wire and clip back to the alt and it should work!
D davelin83 New Member Sep 8, 2013 #3 I will take a look might have taken it off wile messing about thanks
B brettguise New Member Sep 9, 2013 #4 It should be white if its not too dirty, Some contact cleaner on it and where it clips to should do the trick. The same if its acting erratic and the needle is bouncing up and down.
It should be white if its not too dirty, Some contact cleaner on it and where it clips to should do the trick. The same if its acting erratic and the needle is bouncing up and down.
D davelin83 New Member Sep 10, 2013 #5 I will take a look its so hard to find time while im at work all day lol