I am quite confused at two points..

My first point is which bolts do I undo the ones in blue or the ones in red? The Haynes manual says not to disturb three bolts in the side of the clutch cover but I cannot tell what these 3 bolts are?



My second problem is how do I stop the clutch from spinning, I can't think of any way to do it, I have searched and only came up with jamming the forks with something but I don't have anything to jam it to (the engine is still within the defender)

The blue ones, Put a spanner on em, give it a clout with a hammer that should crackem loose, then a ratchet should do fine.

SHEDJIM said:

The blue ones, Put a spanner on em, give it a clout with a hammer that should crackem loose, then a ratchet should do fine.

Click to expand...

Ah thanks SHEDJIM, do that now

you put chisel in teeth of flywheel and jam,there are 6 bolts altogether make sure to check spigot bush in flywheel,and put clutch plate rigth way round cover fits on 3 x dowel