sid999

New Member
Hi all
Took the p38 on some sand with all tyres let down to 12ish psi,lots of clunking noise from the frnt end and the car just burried itself,makes the same noise if i put my foot down on wet road.Any ideas cv's are all good. cheers Kev
 
Hi all
Took the p38 on some sand with all tyres let down to 12ish psi,lots of clunking noise from the frnt end and the car just burried itself,makes the same noise if i put my foot down on wet road.Any ideas cv's are all good. cheers Kev

Hardy-Spicers on the propshafts?

What year is it? Did an orange light flash up on the dash with a clicking noise? 1999 onwards have traction control on all 4 wheels and it might be braking a spinning wheel at the front. Earlier years only had it on the rear (if at all).

Other possibilities are half shaft loose in hub (green Loctite might help), diff or maybe a bush worn or droplink snapped. Or even suspension damper snapped.
 
Hardy-Spicers on the propshafts?

What year is it? Did an orange light flash up on the dash with a clicking noise? 1999 onwards have traction control on all 4 wheels and it might be braking a spinning wheel at the front. Earlier years only had it on the rear (if at all).

Other possibilities are half shaft loose in hub (green Loctite might help), diff or maybe a bush worn or droplink snapped. Or even suspension damper snapped.
its a 2001 just had the right had shaft replaced as i had a good one sitting around ,didn't stop the noise no obvios signs underneath.Whats a Hardy-Spicer?
 
its a 2001 just had the right had shaft replaced as i had a good one sitting around ,didn't stop the noise no obvios signs underneath.Whats a Hardy-Spicer?

The universal joint at each end of the propshaft.
 
Hi all
Took the p38 on some sand with all tyres let down to 12ish psi,lots of clunking noise from the frnt end and the car just burried itself,makes the same noise if i put my foot down on wet road.Any ideas cv's are all good. cheers Kev
Does sound the traction control jumping in. More like a clunking from behind the drivers footwell. If the traction light lights up as well its doing it's job. ;)
 
Thanks all definately chain in the transfer box,located a good one less than 10k's from me getting fitted next week....cheers all kev
 
Thanks all definately chain in the transfer box,located a good one less than 10k's from me getting fitted next week....cheers all kev

The Morse chain? Worth doing viscous coupling and all seals while you are in there. Make sure the output flanges are polished before putting the new seals in or it'll wear them away PDQ. From the Ashcroft Transmissions website:

"The Borg Warner rebuild always includes a new chain, output shaft, oil pump and includes new thrust washers and reshimming the center diff assembly; these are the four main wearing parts."
 
goingto put a second hand box in but gonna keep the old one to try to recon myself,im in western Australia so parts are expensive and rare,luckily ive got two p38's so one offline isnt a problem.
 
goingto put a second hand box in but gonna keep the old one to try to recon myself,im in western Australia so parts are expensive and rare,luckily ive got two p38's so one offline isnt a problem.
Good luck and we'll done for posting what you found.:D
 

Similar threads