My transfer box has been leaking for years and rumbling for a while too, I decided to buy a rebuild kit from ashcroft. Followed the manual but used the shims that were in it.
The vibration/rumbling has gone but now a get a clunking sound when the engine starts and when under load.
The box has got to come off again as two bolts snapped, at some point somebody tried to solve the leak as it didn't have any gaskets on, only sealant and the bolts were covered in loctite.
Any advice on appreciated
The vibration/rumbling has gone but now a get a clunking sound when the engine starts and when under load.
The box has got to come off again as two bolts snapped, at some point somebody tried to solve the leak as it didn't have any gaskets on, only sealant and the bolts were covered in loctite.
Any advice on appreciated