C

csn4646

New Member
I have a '97 Disco and the clock doesn't display the right time. It lights up and displays incorrect numbers and random configurations of the seven lines that are used to create each number. If i push on the clock with my finger it will show the time, usually. I was wondering if anyone has had a problem similar to this or have some suggestions on how to correct this problem.

Thanks
 
I have a problem with the clock in me M reg 1994 Disco 300Tdi. - The clock digits are so dark that I can hardly see them! Could this be something along the same lines, i.e. a dodgy connection somewhere, or is it normal?
 
nope - it means the bulb is blown.

you need a 509T (comes in its own housing). Which yu can also get in a pretty blue :eek:.
 
just CAREFULLY take it apart and resolder all solder joints with a small fine tipped soldering iron. Then try it again.

or send it to me with a blank cheque :D.
 
Hi my clock was doing the same thing so i went to remove it with a thin bladed knife it started working again before i got it out
 
My clock doesn't light up, I've changed the bulb and checked again but no joy. Any suggestions chaps? Really gittin on me tits...
 
You must log in or register to reply here.

Similar threads

H
Discovery Sport Sept 2015 - Breakdown
Replies
14
Views
2K
Phil-G
P
P
2010 Freelander will not start after a few fuses were pulled and re fitted!
Replies
0
Views
611
ped160
P
Blob
L322 (Not your usual) battery drain
Replies
7
Views
2K
Datatek
Datatek
F
P38A EAS -prior minor issues then failure - no real accumulating indicators
Replies
15
Views
1K
kurtjohnson10
kurtjohnson10
F
Returning had to re registered. Have a '97 RR P38 -
Replies
5
Views
1K
frozen north 2
F