S

ShotgunDrew

New Member
Well, after purchasing the necessary service items I found out my TD4 has a K&N filter fitted... I've stuck the new one in for now, as the K&N is filthy.

The question is... how do I clean it and do I need to oil it when I've cleaned it all up?

Will anywhere clean it for me if I send it off? (Can't be bothered messing around with solvents etc).
 
If its the metal mesh type then its a wash in petrol and then dip in oil and shake.
I will do it fur £20 plus p&p - and so wud Mondeo if ya like?

I wud even send it back in a re-sealable bag - so the posty dont get too oily
 
The Mad Hat Man said:
If its the metal mesh type then its a wash in petrol and then dip in oil and shake.
I will do it fur £20 plus p&p - and so wud Mondeo if ya like?

I wud even send it back in a re-sealable bag - so the posty dont get too oily
Click to expand...

Ta... but I was gonna take it to a local garage!
 
You can buy "service kits" from K&N. Cheaper to use your own stuff, though.

Cheers

Blippie
 
Follow K&N instructions - you should be able to get them off their website.

Be carefull not to over oil it or the excess will contaminate the maf sensor and ruin it.

I prefer BMC or ITG filter as these are preoiled for life.

Ron
 
The Mad Hat Man said:
I hate these things "for life" they very rarely tell yu whether the life is 1 week or 20 years!
Click to expand...


That's true.
Depends upon how dusty the environment you drive in is too I guess. I can imagine Freelanders going in some dusty places!!

I just give my BMC one a vacuuming every service to get rid of dead insects. It still looks clean after 10k miles.

Ron
 
ShotgunDrew,

The Elise gang clean them ourselves all the time.

Clean filter in warm soapy water.
Dry using the 'Windmill' method, hairdryer method or simply leave in the airing cupboard over night (ask the misses first! I got a right bollocking).
Pop down to Halfrauds and get some filter oil for a couple of squid or buy some of K&N's own for a few squid more.
Once dry, spay oil on and refit...jobs a carrot!

K&N aren't that bad, they do breath easier than factory fitted but there are a lot better ones out there. Also, if its an after market filter you should tell your insurance company, having it fitted could invalidate your insurance.
Cheers
Stewart
 
Hi,

I used the "windmill" method as well, used an old fan I recuperated from an old diskunit, as this diskunit was something of the late 60's it's not the "mini size" as these days yet which resulted that I almost had to nail the filter down to the ground in order to not being blown away ..:D :D :D :D
But it did the job magnificently.:) :) :)

 
Come on Willo lets set up an airfilter cleaning and re-conditioning business...You can wash and I'll do the drying.... with you fan thingy!!!!!!

Stewart
 
Stewpot said:
Yeah! but have you seen the size of our hair dryer!!!!!
Click to expand...

It's not necessarilly the size of it but what it produces, it's a monster, it has an 1.08hp motor on it .. Once I used it to 'support' the wind while BBQing at my neighbour, we had to collect all the sh.. in a hurry as it was setting fire on everything around it .... it blew everything out of the BBQ set. When I put the plug in the power everything needs to be fixed pretty well as there is so much torque on it, unbelievable.:)
 
You must log in or register to reply here.

Similar threads

D
air filter - K&N or standard??
Replies
3
Views
552
Officerdibble
Officerdibble
yfo866
Oil and filter change on 101 with the original V8
Replies
2
Views
947
Rangieman123
Rangieman123
Rhode rover
Removal of oil bath air filter cartridge
2
Replies
26
Views
3K
Guidoma
G
Cobby44
FL2 SD4 Auto 13 Plate - Loss of Power/Rev Counter Inconsistency
Replies
14
Views
817
Arctic2
Arctic2
Andy Warren
Disco 2 ACE Filter
Replies
4
Views
831
Andy Warren
Andy Warren