pete@her

New Member

• May 31, 2008

• #1

as anyone come across this before,clunk from frount end when turning left or right sounds like drive shaft or bearings but i have had both sides off ,but both ok,i cant feel any movement in prop,t rod ends look ok .cheers

 

oil dripper

Well-Known Member

• May 31, 2008

• #2

pete@her said:

as anyone come across this before,clunk from frount end when turning left or right sounds like drive shaft or bearings but i have had both sides off ,but both ok,i cant feel any movement in prop,t rod ends look ok .cheers

Click to expand...

i had this on one of my rangies turned out to be a bottom swivel bearing was buggered

 

pete@her

New Member

• Jun 1, 2008

• #3

thanks ,but now checked these out and ok ,maybe diff ? i just cant find any movement in anything maybe its just the rubbers (bushes) getting abit peed off now,cheers pj

 

B

blackvoguebeauty

Active Member

• Jun 1, 2008

• #4

Could be the radius arm bushes/bolts, they can work slightly loose and cause a clunk. Try tightening those and see what happens. Probably worth putting new bushes and bolts in. Cheap and easy job.

 

B

blackvoguebeauty

Active Member

• Jun 1, 2008

• #5

Lie underneath and watch the radius arm bushes while someone rocks the car. You might even be able to hear a clunk. A bolt was rusted in on mine and knackered the bush.

 

pete@her

New Member

• Jun 2, 2008

• #6

thanks bvb, ill give that a go if it ever stops raining.