XRIZLAX

Active Member

• Nov 11, 2015

• #1

hi guys, finding ive got oil in my hoses and intercooler iam looking at fitting a new chra. has anyone done this to theirs and is it an easy job? looks fairly straight foreward, and where did you source the chra?
ive heard of cheap chinease crap of fleabay which i wont use, so is there any recomendations for quality chra,s?

 

Flossie

Well-Known Member

• Nov 11, 2015

• #2

Chra??

 

blue beasty

Leaks an prone to bits dropping off

• Nov 11, 2015

• #3

Central Housing Rotating Assembly.....the spinny bit of a turbo

 

Flossie

Well-Known Member

• Nov 11, 2015

• #4

Ahhh..,.thanks!

 

blue beasty

Leaks an prone to bits dropping off

• Nov 11, 2015

• #5

Dunno about replacing one though

 

Al2O3

Well-Known Member

Full Member

• Nov 11, 2015

• #6

Had me wondering too

 

ivancrx

Well-Known Member

• Nov 12, 2015

• #7

They are quite easy to do, mark a datum point on the turbo casing and take a few photos before taking it apart just so you can align it correctly when putting it all together again.
If i remember right 4 bolts and a large snap ring is all that holds them together.

 

XRIZLAX

Active Member

• Nov 12, 2015

• #8

Yea looked on utube and they look easy enough, was just wandering where the best place to get one from as I don't want to buy Chinese rubbish.