W

whitstella

Active Member

• Sep 6, 2016

• #1

Hi

I've got my chassis ordered today. I've gone for a 300tdi with a td5 rear. ( which I've been told is RoW model now ). I've got a fuel tank and new sender and tank cradle, now im after an exhaust system does anyone know what I need to order.

Cheers steve

 

Discokids

Well-Known Member

• Sep 6, 2016

• #2

Marsland?

 

Al2O3

Well-Known Member

Full Member

• Sep 6, 2016

• #3

Is it not RC who do bespoke ones?

whitstella said:

Hi
I've got my chassis ordered today. I've gone for a 300tdi with a td5 rear. ( which I've been told is RoW model now ). I've got a fuel tank and new sender and tank cradle, now im after an exhaust system does anyone know what I need to order.
Cheers steve

Click to expand...

If you haven't specified when ordering a bespoke chassis, will you not need to wait until it turns up to see where they have fitted the hangers?

 

W

whitstella

Active Member

• Sep 7, 2016

• #4

Yeah marslands.

 

W

whitstella

Active Member

• Sep 7, 2016

• #5

I've already seen the chassis. They are 300 tdi exhaust mounts in the middle it's got none on the tube tub outrigger then the 1 on the rear crossmember. Land rover did make this version of the land rover with a 300 engine and a td5 tub,called rest of the world. But looking for an exhaust system is tricky.

 

james6546

Well-Known Member

• Sep 7, 2016

• #6

I had some issues with this, I solved them by bending the central hanger and getting the back section welded. I'll get you the part numbers for the central part when I get home this evening.

I am planning on getting a custom stainless one made at some point as the welded part isn't holding up too well so far.

 

aaronmorris

Head's a shed

• Sep 7, 2016

• #7

Row spec 300tdi exhaust is available, from memory the down pipe is the same.
Middle and rear are part numbers -
ESR4526
ESR4527
If we are talking about a 90 that is?
I have just built a 200tdi 90 with td5 rear tank and made the above work.