hogie
Active Member
well I failed the MOT today as a small hole was found on the n/s chassis crossmember that fits in front of the fuel tank and the upper link arms (A frame) attach too. That small hole is now a big one as I have been tapping away at it to try and find good metal. YRM don't do a repair piece for this, does anyone know of a source for a new crossmember for this area and the bolt on brackets that attach to this to take the upper link arms? If not, is my only option (aside from a new chassis) to try and find a scrap chassis to cut this piece out from? (There isn't enough good metal to weld a patch to so that isn't really an option)
Vehicle is a 1998 300 TDI 110 station wagon
Vehicle is a 1998 300 TDI 110 station wagon