THEengineer
whatever
want to clean my chassis on the weekend i have a pressure washer is this what everyone else uses?
lanny man 90
Well-Known Member
Steam cleaner
THEengineer
whatever
its a cheap pressure washer want to get all the mud off i put on it at the weekend
shakerattlengroan
New Member
Yep, pressure washer good,but be aware, you will be washin ****e outa yer chassis for weeks if it's not bin done before,as you always miss bits,lol.Also car ramps are good fer getting right underneath.
thought it was mine!
New Member
rub in cheap washing powder and drive threw local ford a few times.
THEengineer
whatever
my uncle has big old ramps will borrow those
THEengineer
whatever
my floors rotten might fill it with lots of water saying that its a fender water will **** in everywhere anyway
Landyjd
Active Member
I had the chassis steam cleaned before I recoated it with GM undersealant. The steam clean was really effective and the chassis was spotless afterward. It also meant that the guy at the garage where they did the steam cleaning was able to spot a couple of little rust spots that needed welding near the back.
Steam clean is the way to go.
Steam clean is the way to go.
landrover11019
Active Member
Take it to a local commercial steam cleaner, about £60.
Then keep it clean with your own pressure washer.
Then keep it clean with your own pressure washer.
