Trumar
Active Member
That is what I have been doing for last 5yrs apart from replacing front wings and doors I have done everything else. I have done other posts on here about trouble I’m having with the electrics they have spanked me big time lol I just can’t get my head around them. But replacing the chassis now is not possible and probably not for at least 2yrs. What I do want to ask is Do you think I could just patch up the chassis so as I can take me dogs to the fields which is just over a mile away from me I want to do this every other day. I will then be able to save the money to get the Maer chassis. I know I got to layout for the metal sheet and a welder this is easier for me to get to.
Not much to weld to, at the least it needs some repair sections welded in, like a half chassis. Even then there doesn't look like much to weld that to.
It is hard to tell with photos but in general rust is always worse than it first looks.
Of course if you are good at fabrication and can make the top shock mount then crack on.
It is hard to tell with photos but in general rust is always worse than it first looks.
Of course if you are good at fabrication and can make the top shock mount then crack on.
Pardon our interruption...
www.ebay.co.uk
It's only worth doing if the front end is good and there is solid metal to weld to.
You will also need to be confident in your welding abilities or get a pro to weld it up.
Just a random link of Ebay not a recommendation.
Trumar
Active Member
Been checking over the front chassis and it has had quite a lot of welding mainly at the very front both sides of where the leaf springs attach to. So I have taken on board what you have been saying to me about a Maer chassis! Is the Maer the only one to go for for the 2k?
I can't answer that but they seem to have a very good reputation.
Other chassis are available.
Trumar
Active Member
Hello @Anaconda if it’s ok I got another question for you….when I do get a Maer galvanized chassis, I brought some of the Lanoguard for the chassis that is no good, should I spray the inside of the new chassis? I was also going to cover the chassis with under seal as I have a large tub of the stuff? Thanks Mark
Think you would be better off painting the chassis, then spray inside with a cavity wax of your choice.
Some people leave the chassis bare and don't paint it at all.
Certain process to follow when painting a galv chassis.
I have never used Lanogaurd, some people like it, others don't.
Some people leave the chassis bare and don't paint it at all.
Certain process to follow when painting a galv chassis.
I have never used Lanogaurd, some people like it, others don't.
Trumar
Active Member
Thank you. Is there a certain paint to use or any chassis paint? Lanoguard I checked their reviews and people seem to be happy with it.appreciate you helping me out.
Trumar
Active Member
Appreciate the heads up! Be a result if mine ends up like yours lol
