Hi, i have searched the site but unable to find the answer to the question that i have, we are taking out the original Freelander radio, although we are stuggling to find the point to remove the wiring loom, it seems that there is no connector box, apart from the small part in the picture with some tape around, we bought a new standard freelander connector to change to a CD player, any thoughts or help would be much appriciated, thanks.
![IMG_0915[1].JPG](/data/attachments/26/26612-60ba9213c01c9d8afdf94ba6fa959324.jpg)
![IMG_0918[1].JPG](/data/attachments/26/26613-782438d7abff18a3049e2bd68103892d.jpg)
Freelaner
Landy Driver
Someone has took out the original connector for some reason and wired into that, you may have to cut the plug off yours and wire to their connector!
Have a good check in there for any other blocks first though.
If your not confident doing this get an autoelectrician or someone off here thats local in Brisel to wire it.
Have a good check in there for any other blocks first though.
If your not confident doing this get an autoelectrician or someone off here thats local in Brisel to wire it.
teddywood1
Well-Known Member
check under front nearside seat thats where the cd play will be if you have one
The only box is the one with the tape around, the wires then go down under into the main wireing loom, i am happy to do this and i thought straight away someone have had a play with it before! i guess they decided to take the original out for some reason?
Went out and checked, and would you beleive it there is one under the seat, it was filled with cd's but when i put the radio on cd player you can hear it make a noise trying to play but then comes up with no cds (6 in their!) does anyone know what this could be?
Hi I note that you have that same problem as myself, just tried to put back R770 original radio to find that one block has been taped. now not sure as to what or how many blocks fit into the connections. I have two and a side block the large one is missing.
