rangie1998

Active Member
Wanting to change blend motor as it's blowing cold only on passenger side. Looked on eBay, is there a specific one I need or are they all the same?
 
Plain black one drivers side grey and blue

If you buy a set obviously they are pre wired to the plug and colour coded. If you buy a single unit it will fit anywhere as long as you fit the pins in the correct places on the plug. ALL the motors are the same unit.
 
If you buy a set obviously they are pre wired to the plug and colour coded. If you buy a single unit it will fit anywhere as long as you fit the pins in the correct places on the plug. ALL the motors are the same unit.

Yep, good advice :)
 
I will probably cut the wires and just solder to new motor, sounds easier than removing more dash than I need to.
 

Similar threads