ngredmond

Member
Installed the cup holders into my Disco 2. Bahama Beige in colour, but the OCD in me is kicking in as my Disco has the Tundra interior colour...

What I was interested to find out. Does anyone know the colour code, or reference for the centre console, I'd like to paint the holders to match. Or is that to much :D

view
PXL_20211205_154750337.PORTRAIT.jpg
 
Installed the cup holders into my Disco 2. Bahama Beige in colour, but the OCD in me is kicking in as my Disco has the Tundra interior colour...

What I was interested to find out. Does anyone know the colour code, or reference for the centre console, I'd like to paint the holders to match. Or is that to much :D

view
View attachment 254032
Take the centre console out.
Take it to B & Q.
Get them to colour match it, then paint your cup-holders with the paint they mix for you.
You could always clear-coat over that!!!
Or get all trendy and paint it in a contrasting colour, or the same colour as your Landy!



Yes, it IS too much!!!:D:D:D:D:D
 
Installed the cup holders into my Disco 2. Bahama Beige in colour, but the OCD in me is kicking in as my Disco has the Tundra interior colour...

What I was interested to find out. Does anyone know the colour code, or reference for the centre console, I'd like to paint the holders to match. Or is that to much :D

view
View attachment 254032
Where did you get them and how much ??
 
Installed the cup holders into my Disco 2. Bahama Beige in colour, but the OCD in me is kicking in as my Disco has the Tundra interior colour...

What I was interested to find out. Does anyone know the colour code, or reference for the centre console, I'd like to paint the holders to match. Or is that to much :D

view
View attachment 254032
Did you have to take the centre console out to fit them or just lift it slightly ? They do look good.
I have a couple of the 3D printed ones to fit (any colour you like as long as it's black:)) & as mine is the same colour interior as yours I'd be interested if you find matching paint, if you could let me know please that would be much appreciated, mean while I'll have a look myself;).
 
Cheers mate. But at 61 quid each I’ll give it a miss. Why are they so feckin expensive :confused:
As I said I got these for £25 the pair at the LRO show in Peterborough they have inserts to hold two different size vessels & fit In the same position.
Now @ngredmond has mentioned paint I will have a look & see what's about.
20211206_224208.jpg
 
As I said I got these for £25 the pair at the LRO show in Peterborough they have inserts to hold two different size vessels & fit In the same position.
Now @ngredmond has mentioned paint I will have a look & see what's about.View attachment 254091
I just had a look on eBay after you mentioned these. A guy is making some to order for standard mugs or travel mugs at £32 a pair. They need to be screwed into the top of the console though which I don’t like the look of. I also found genuine ones for £65 a pair. Still not buying them though as I need new front springs and I think the rad has a leak too. They are priority at the moment.
 
I just had a look on eBay after you mentioned these. A guy is making some to order for standard mugs or travel mugs at £32 a pair. They need to be screwed into the top of the console though which I don’t like the look of. I also found genuine ones for £65 a pair. Still not buying them though as I need new front springs and I think the rad has a leak too. They are priority at the moment.
Yeah I didn't like the screw hole in the centre for fitting them so I'm going to drill a hole through the side like the genuine ones.
 
I saw some of these at Newbury 4x4 going for about £20 I should bought some as spares, stall had lots and nobody was buying .
 
I used 2 self tapping screws for each cup holder. 1 through the top of the base and 1 through the side.
Make sure you leave enough room to actuate the E-brake.:p
80-96e300d7_58c6_47ab_abec_cb9ef53338ea_275940da865718195ce7c6d71370e486207f7612.jpeg
 

Similar threads