simon.hill

New Member

• Mar 8, 2010

• #1

Hi Everyone, i'm a new member today and need some help if possible.

I have a Discovery II which i have had for nearly 6 years with out any major problems, however i do have a problem now. The central locking on the drivers door packed up about 6 weeks ago. The door would not open on the remote, not a hugh problem and i put up with it by using the remote and then unlocking the door with the key. But then the passenger front door won't unlock and now one of the rear does won't unlock with ether the key or remote. I have tried spray WD in there, but this has done nothing. Any ideas please.


Regards
Simon

 

discool

Well-Known Member

• Mar 8, 2010

• #2

The drivers door lock is the master so if that fails then there will be problems with the other locks (slaves).

 

simon.hill

New Member

• Mar 8, 2010

• #3

So, do you think changing the drivers door servo will sort the problem with the other doors?

Simon

 

discool

Well-Known Member

• Mar 8, 2010

• #4

Not quite as easy as that on a D2 it's combined within the lock so the lock will have to be replaced. It seems to be a commom problem with the drivers door lock going faulty.

 

simon.hill

New Member

• Mar 8, 2010

• #5

Ok, Cheers

 

simon.hill

New Member

• Mar 8, 2010

• #6

There's no way of changing the servo with out the door lock also?