B

baldybrewer

Member

• Jan 14, 2018

• #1

Hi guys

I need some advice/pointing in the right direction, previous owner has fitted a parrot kit and its in a distracting position for me so I want to remove it. Took the stereo out but theres not enough room to get to all the wiring that comes with it is there a how to anywhere on how to remove the right side vent, air conditioning controls, and facia panel switches thanks.

 

brian47

Well-Known Member

• Jan 14, 2018

• #2

Member @RyanDay1 did a good write up about the way he fitted a double din radio unit in the centre console which required some pretty radical surgery on the dashboard which might be of use to you, giving you some ideas about how to get into that part of the vehicle.
It can be found at:-
https://www.landyzone.co.uk/land-rover/aftermarket-double-din-stereo-install.308189/

 

B

baldybrewer

Member

• Jan 14, 2018

• #3

Thanks will have a good read

 

GJ1

Active Member

• Jan 16, 2018

• #4

You can remove the climate control module quite easily if that will help you, two big spring clips on either side. I’ve seen some remove using blunt knives (butter knives) to retract the tangs, but I fount it simpler to remove the digital clock assembly with a slim credit card (club card) too and bottom to give me access to the climate control module. There are a couple of connectors on the reverse, and then it’s away.

 

B

baldybrewer

Member

• Jan 16, 2018

• #5

Yeah managed to get the climate control module out as well as the radio and there was just enough room to remove the hands free kit