Dent

New Member
How can I stop the interference from the wipers ?

Do I have to suppress the wiper motor or is there another way ?
 
try running a clean live from the battery.It cured the interference on mine.
 
try running a clean live from the battery.It cured the interference on mine.

I've got one to the aerial mount, had to do that to swr it

Could it be the patch lead ? , it used to run over the door top, got a bit rubbed and a slight kink :D .
 
I've got one to the aerial mount, had to do that to swr it

Could it be the patch lead ? , it used to run over the door top, got a bit rubbed and a slight kink :D .
why have you a live to the aeriel mount? shouldnt it be a negative earth
 
also you can get filters to fit in the power cable, i did this for my rotel on my tractor, cured the interfearence from the twin beacons
 
also you can get filters to fit in the power cable, i did this for my rotel on my tractor, cured the interfearence from the twin beacons

Where did you get the filter ? ,

Tried the cb shop but they want £20 plus vat, add fuel to pick it up thats around £30 to stop a bit of noise :mad: .
 
if your still struggling and are on the Wales trip bring everything along and pretty sure between us, we'll get it fitted
 
if your still struggling and are on the Wales trip bring everything along and pretty sure between us, we'll get it fitted


Good idea I might just do that

Don't seem to have much look with them, this is a new one, as on the last trip the only person I could hear at times, was Tim c :doh:

I did'nt know if the gates needed to be shut or open. In the end Tim c was doing hand signals , which was strange.................... as everyone else was doing them at him :D
 

Similar threads