C

CyclopsRocking

New Member

• Sep 12, 2023

• #1

Can anyone with a Series 3 tell me what the height of the canvas roof is please? I'm looking for the measurement from the top of the doors or top of windscreen to the highest point of the roof.
The reason is I have a standard garage opening and want to make sure it fits before I order the canvas set. It currently has no roof so can't use hard top as a guide in case you're wondering. Also it's on Defender springs and tyres so measurement from the ground on a standard S3 won't be right either.
Thanks in advance!

 

WoodyO

Well-Known Member

• Sep 12, 2023

• #2

This drawing gives an idea.

Post in thread '109 3/4 Hood Stick dimensions?' https://www.landyzone.co.uk/land-rover/109-3-4-hood-stick-dimensions.223233/post-2535136

 

C

CyclopsRocking

New Member

• Sep 12, 2023

• #3

WoodyO said:

This drawing gives an idea.

Post in thread '109 3/4 Hood Stick dimensions?' https://www.landyzone.co.uk/land-rover/109-3-4-hood-stick-dimensions.223233/post-253513

Click to expand...

 

C

CyclopsRocking

New Member

• Sep 12, 2023

• #4

Thanks!

 

CohPC

Well-Known Member

• Sep 13, 2023

• #5

Before i altered the height of my garage door the only issue was the centre cross bar of the hood sticks, (because my drive slopes to the garage once the front wheels are in the back ones are higher - if it didnt slope it wouldnt be an issue) standard height side hinged doors though - an up and over door might be lower.

If it dont fit your choices are - let down tyres when going in/out of garage, pump up after, alter garage door height, buy new garage/house if its an integral garage, leave roof off buy wetsuit for wet weather driving

 

Dorset_dumpling

Well-Known Member

• Sep 16, 2023

• #6

Just measured mine, when empty the height from the ground to the highest point of the roof is 198cm. That is an 88 on 7.50 tyres. From the top of the door to the top of the roof is 25 cm.