Keviswatt · Feb 15, 2012

Hi

Just got my white 4.0 se yesterday and with lack of a manual wondered if you guys might explain a few things.

I'm assuming my cruise just doesn't work, but what's the procedure to set etc incase im doing it wrong

The air suspension works, but won't always go to motorway setting when I tell it to, is there a certain way to use it and set it were you want it, also can you drive the rr at its lowest setting?

Also, how do I find the paint code for the se, was there only the one shade of white, and any idea were to get touch up pens etc

Thanks in advance

Kev

Sorry for the list of questions, just want to start getting things as they are supposed to be

wammers · Feb 15, 2012

Press inhibit switch select motorway. It should drop and stay there until inhibit is deselected. No you cannot drive in lowest setting unless you select creep mode. And only then upto a certain speed. Drop to access height and press inhibit switch. You should get "EAS MANUAL" on dash. That is creep mode.

JerryXt · Feb 15, 2012

for the cruise control, there's a button next to the hazard lights. Press the button, get above 40mph and press the bottom left button on the steering wheel.

wammers · Feb 15, 2012

JerryXt said:
for the cruise control, there's a button next to the hazard lights. Press the button, get above 40mph and press the bottom left button on the steering wheel.

Cruise should work above 25 mph. At least it does on the diesel.

JerryXt · Feb 15, 2012

I stand corrected, thanks.

Keviswatt · Feb 15, 2012

Sorry to be a total pleb, but is the inhibit the button to the right of the height select lights?

Should I get a light on the cruise button next hazards when pressed? What sites the right button on steering wheel do?

Cheers folks

wammers · Feb 15, 2012

Keviswatt said:
Sorry to be a total pleb, but is the inhibit the button to the right of the height select lights?

Should I get a light on the cruise button next hazards when pressed? What sites the right button on steering wheel do?

Cheers folks

Yes you should. R/H button on steering wheel marked RES. Is for cruise on petrol models only. Does nothing if you have a diesel.

wammers · Feb 15, 2012

JerryXt said:
I stand corrected, thanks.

According to hand book we are both wrong it says petrol 28 mph diesel 31 mph. But mine works just above 25.

Chrisfrain2007 · Feb 15, 2012

wammers said:
Yes you should. R/H button on steering wheel marked RES. Is for cruise on petrol models only. Does nothing if you have a diesel.

Mine does, it resumes the set speed after pressing brake,

JerryXt · Feb 15, 2012

wammers said:
According to hand book we are both wrong it says petrol 28 mph diesel 31 mph. But mine works just above 25.

that's funny!

Keviswatt · Feb 15, 2012

Cheers guys, the cruise does work

Buttons must be worn as nothing written on them, no light on dash button though, or many other lights clock/climate control, should it be backlit?

Chrisfrain2007 · Feb 15, 2012

Keviswatt said:
Cheers guys, the cruise does work

Buttons must be worn as nothing written on them, no light on dash button though, or many other lights clock/climate control, should it be backlit?

Yeah usual culprit is the dash Dimmer o. Top of indicator stalk

Keviswatt · Feb 15, 2012

Chrisfrain2007 said:
Yeah usual culprit is the dash Dimmer o. Top of indicator stalk

Ah ok, the clock did come on for a bit when i adjusted that, replacement needed then!

Chrisfrain2007 · Feb 15, 2012

Keviswatt said:
Ah ok, the clock did come on for a bit when i adjusted that, replacement needed then!

It may not be, I say usual culprit as plenty have asked where all their dash lights have gone, and they didnt know the dimmer was there

Datatek · Feb 16, 2012

EAS not going to full height is likely to be leaking airsprings, they have a design life of 7/8 years 80K miles. If they are leaking the compressor may also need a rebuild.

mozz smith · Feb 16, 2012

what year and model is it ? give all details so others can help ... paint code ? lift bonnett up look for black plate on left hand side of top cross bar above radiator i.e. front panel where grill fits to . it will show a letter in brackets i.e.
= (A) check on rave or ring main dealer spares dept they will tell you the name of the color also whilst your at it give them vin no and ask for 4 digit eka code and 4 digit radio code (( for future reference ))

cheers for now MOZZ

davef2901 · Feb 17, 2012

For what it's worth, I'd leave the EAS on auto and let it sort ride height out if it's working ok, it should drop to motorway after a short while above 60 ish mph.

Keviswatt · Feb 17, 2012

davef2901 said:
For what it's worth, I'd leave the EAS on auto and let it sort ride height out if it's working ok, it should drop to motorway after a short while above 60 ish mph.

Cheers, thats what i have ended up doing and its working great. Think i was just playing around with it to much

Saint.V8 · Feb 17, 2012

davef2901 said:
For what it's worth, I'd leave the EAS on auto and let it sort ride height out if it's working ok, it should drop to motorway after a short while above 60 ish mph.

Or 50-52mph usually....

60mph is the L322 and sport I believe.

wammers · Feb 17, 2012

Saint.V8 said:
Or 50-52mph usually....

60mph is the L322 and sport I believe.

Yup P38 30 seconds above 50 drops to motorway, 30 seconds below 35 returns to standard.

Member

No longer with us, RIP

New Member

No longer with us, RIP

New Member

Member

No longer with us, RIP

No longer with us, RIP

Active Member

New Member

Member

Active Member

Member

Active Member

Well-Known Member

Well-Known Member

New Member

Member

Dyed-in-the-wool 100% RR Junkie

No longer with us, RIP

Similar threads