G

Gphilla

Member
Managed to get the rear tub off my 110 at the weekend only to find several holes caused by rust. This being my first landy and only owned a couple of weeks, i am curious to know at what point do you have give up on the patching and replace ie rear x member and outriggers ?
I will get some photo's up when i get home but just wondered what people have managed to resurrect in the past ??
 
Depending how good a fabricator/welder you are.
Me being tight would go for plasma holes out and new plate mig welded in.
But I have the use of the facilities at work. Ramps and welding plant.
 
to be honest if you have got the time and money a re-chassis with a galv chassis is your best option but its not a 5 minute job plus your looking at £1200 for the chassis. I have seens chassis's which have been plated/rebuilt so much theres barely any original metal left, if done properly though there is no reason not to keep patching...
 
If you want inspiration look at Billy budget rebuild a few threads down and see the rebuild he is doing it covers the holes you describe in the chassis with pics.... If you start tapping around you will find more holes, then another! Price up rear x member and out riggers but if you can do it yourself thats fine.. I reckon if you get a galvanised chassis you would get at least half your money back if you sell it on... a welded patched rusty chassis is called a project and reduces the value of the Landy but it is fun.
 
Cheers but a galvanised chassis is way out the price range and technical ability, here are some photos of the offending items
photo4_zps79ec59e9.jpg.html
photo3_zpsb9abc07a.jpg.html
photo2_zps3fb991dc.jpg.html
http://s1122.photobucket.com/user/gphilla/media/photo1_zps25dd913e.jpg.html?sort=3&o=3
 
Ive seen worse than that repaired, although as posted you will find more if you go at it with a grinder!
You can get prefabricated outriggers, xmembers, possibly even a whole rear chassis if you want to save time on the plating.
 
Thanks for your comments, with a couple of the patches near fuel line/tank i dare say i'll be best removing but will i need to prime the system before it will run again once reconnected ???
 
Be ok with tank in I'd think just move the lines away but for safety might as well


System will just need bled through after unless its auto prime
 
You'll have fun doing it, you'll learn loads and save a shedload of pennies. Get decent quality replacement bits, get rid of all the rust, and it'll be as good as new!!!
 
You must log in or register to reply here.

Similar threads

K
What money should I be asking?
2
Replies
27
Views
4K
Karls
K
S
Disco 1 Disco 1 Rust repair prep
2
Replies
20
Views
2K
sv_dOnut
S
Rank Amatuer
Freelander 2 (LR2) Is it worth it?
Replies
11
Views
891
GrumpyGel
GrumpyGel
P
Returning Zoner , asking about early Freelander filters.
Replies
3
Views
555
brianp38dse
brianp38dse
L
Landy 110 1992 (J368 XSG) - is it as bad as mechanic says..
2 3
Replies
44
Views
3K
tottot
tottot