90TD5

New Member

• Oct 4, 2012

• #1

Hi all,

Had to fit a hose back on that came off the turbo causing a loss of power...

Anyway. While rooting around I am concerned that a wire came loose. Car still runs fine but does anyone know where this has come from?!?

Car used to have a winch... Would this have been something to do with that and is now redundant?!?



Thanks as always.

S

(P.S - At the same time I lost a small screw driver in the engine bay... Hopefully it will find it's way on to something and tighten it?!?)

 

Last edited: Oct 4, 2012

90TD5

New Member

• Oct 4, 2012

• #2

Anyone?

S

 

D

digbymole

New Member

• Oct 4, 2012

• #3

just a sensor wire for other models so forget about it

 

90TD5

New Member

• Oct 4, 2012

• #4

Erm. Ok. Sensor wire for what and why isn't it plugged in?!?

Thanks,

S

 

Jongould

New Member

• Oct 4, 2012

• #5

90TD5 said:

Erm. Ok. Sensor wire for what and why isn't it plugged in?!?

Thanks,

S

Click to expand...

LR's share wiring looms so not all plugs are used on all models. Have a look at the end, does it look clean inside or dirty? If its clean then it possibly goes to something, if not then its a good bet its a defunct plug. Also is there anything in range of the plug? If not then its dead set its not needed...

 

GINGE

Greenlane liker, bobble hat hater

Events Planner

• Oct 5, 2012

• #6

If it used to have a winch then it has been modified. Stands to reason it may have had spotlights on as well.

 

PARSLEYRIPPER

Active Member

• Oct 5, 2012

• #7

Is it a wire or a plug, if its a wire I would check to see if its live etc. If it is you dont want it flapping about.

 

mundungus

Active Member

• Oct 5, 2012

• #8

What colours are the wires?