tyclyd
Active Member
I wonder if someone can help please – I was under my 156,000 mile RHD 2005 TD5 90 Defender yesterday doing another job and noticed that one of the small bore coolant pipes had been rubbing on the inner edge of the LHS forward chassis rail and had a significant score / wear mark and left unreplaced was going to fail at that point. I have tied up the hose to bring it away from the chassis but am struggling to work out which one I need to buy as a replacement.
All I can see is it is a smaller bore pipe, a single unit in a rough S shape, fitted to a fixed point at the bottom end into the bottom LHS of a component / the engine (can’t work out which) and at the top end it is fitted into a T piece which is on a larger bore pipe.
On the diagram it looks like item 37 but I can see that does not go into a bigger bore hose – so essentially I am trying to find a single small bore pipe on the LHS (about 35 – 40cm long) – does anyone have a coolant diagram that might help me further or even know pipe I need? I have found the attached diagram via the search function but am now at a dead end.
Thanks
Gary
www.tyclyd.com
All I can see is it is a smaller bore pipe, a single unit in a rough S shape, fitted to a fixed point at the bottom end into the bottom LHS of a component / the engine (can’t work out which) and at the top end it is fitted into a T piece which is on a larger bore pipe.
On the diagram it looks like item 37 but I can see that does not go into a bigger bore hose – so essentially I am trying to find a single small bore pipe on the LHS (about 35 – 40cm long) – does anyone have a coolant diagram that might help me further or even know pipe I need? I have found the attached diagram via the search function but am now at a dead end.
Thanks
Gary
www.tyclyd.com
...@tyclyd, if no joy with this layout click on the top of the page on Defender and you'll get back to all the systems, you just have to find the proper layout
