wickford90 · Jan 30, 2013

anyone tell me what size torx bit i need to remove brake calipers on a 2001 td5 90, i have a set but as usual not the size i need.

jamesmartin · Jan 30, 2013

13mm or 1/2 bihex socket

buckshot · Jan 30, 2013

think you'll find a 13mm multy spline socket will do aswell

wickford90 · Jan 30, 2013

thank you, i have a 13mm bi hex so on with the job.

buckshot · Jan 30, 2013

wickford90 said:
thank you, i have a 13mm bi hex so on with the job.

pretty sure its 13 but if you got a 12 & 14 handy just incase :doh:

the bi hex do work though as long as they are'nt chewed up

wickford90 · Jan 30, 2013

buckshot said:
pretty sure its 13 but if you got a 12 & 14 handy just incase :doh:
the bi hex do work though as long as they are'nt chewed up

Your just messing with my head now.

buckshot · Jan 30, 2013

wickford90 said:
Your just messing with my head now.

you'll be fine

warrior · Jan 30, 2013

It's 13mm 1/2" is very tight need hammer to get it on, I have nw bought a 13mm

jamesmartin · Jan 30, 2013

1/2 is perfect on most of then the heads do corrode away ,i have a specific snap on 1/2 socket especially for the caliper bolts

smckeown73 · Jan 30, 2013

Don't forget the thread lock and make sure the brake lines aren't too rusty to play ball beforehand.

wickford90 · Jan 30, 2013

jamesmartin said:
1/2 is perfect on most of then the heads do corrode away ,i have a specific snap on 1/2 socket especially for the caliper bolts

Got 1/2" and 13mm bihex so should be OK.