luxinterior67
Member
Hi, I'm rebuilding the solid disc front brakes of my w reg Freelander 1. The lower guide pin was seized, but I've cleaned it up and it's moving fine now. My question is about the upper pin. Is the bore for the upper pin different I.e is it keyed. I can only fully insert the pin in certain positions. If I try to rotate the pin when it's fully inserted I can't, I can do this with the lower pin . I've cleaned the bore with wet'n' dry and from what I can see it's pretty clean and shiny. The pins I'm using are new as well. Any help would be appreciated, Cheer's.