L

lawjm4

New Member

• Jul 27, 2006

• #1

can anyone tell me if my steering wheel controls will still work i am replacing my unit with a landrover becker pro sat nav unit dealer hasnt got a clue and could someone please tell me if my td4 03 plate has a speed pulse please help

 

marksurry

New Member

• Jul 27, 2006

• #2

What's a "speed pulse"?

Could try the autoleads web site for a possible answer to your question about steering wheel controls.

 

L

lawjm4

New Member

• Jul 27, 2006

• #3

speed pulse is fitted to cars so that the sat can track the speed of the car helping to track its progress u can usually find it in one of the pins or wiring

 

marksurry

New Member

• Jul 27, 2006

• #4

lawjm4 said:

speed pulse is fitted to cars so that the sat can track the speed of the car helping to track its progress u can usually find it in one of the pins or wiring

Click to expand...

I see Clever gizmo to aid the sat nav. Thanks for that.

 

LR GUY

New Member

• Jul 27, 2006

• #5

i dont think they will im sure that on high line radio's there is a seperate module interface which sits below your centre console, on medium line setups the switches are controled by the head unit itself,

 

L

lawjm4

New Member

• Jul 27, 2006

• #6

sorry bit technical for me i thought replacing one landrover slot in radio with another it would be fine thanks jim

 

ming

SPACE TWOT

• Jul 27, 2006

• #7

lawjm4 said:

sorry bit technical for me i thought replacing one landrover slot in radio with another it would be fine thanks jim

Click to expand...

this one has bin on old thread before same problem and was resolved so scan through see if ya can find it,best oh luck. . .

 

LR GUY

New Member

• Jul 28, 2006

• #8

lawjm4 said:

sorry bit technical for me i thought replacing one landrover slot in radio with another it would be fine thanks jim

Click to expand...

it normally would be but your changing a radio for a sat nav unit

 

L

lawjm4

New Member

• Jul 28, 2006

• #9

i have a part i got from land rover it said i needed it to change over it has a pin connection with 2 connections running off it is this the interface cheers

 

D

docjules

New Member

• Jul 31, 2006

• #10

I've got the Becker satnav fitted (from the factory). It uses the same audio controls as other radios so should work (but may need an interface). The interface should be supplied with the unit if you've got a LR one.

I don't think the Freelander delivers a speed pulse and the avg speed is calculated by the sat nav directly.

What are you going to use for a GPS antenna or have you replaced the aerial as well?

 

L

lawjm4

New Member

• Jul 31, 2006

• #11

it is a landrover one what is the interface and what does it look like i got a got an arirl and gps with it thanks for your reply jim