L

Liverghouls

Member

• Feb 10, 2025

• #1

Hi all it's been a while but here I am , hope your all good ,can you help ? Please ? I was under car trying to get the sump nut off some idiots rounded and jacked side up , disconnected battery , after I put car down battery back etc now no compressor working , and codes c1131 clutch circuit failure and c1a27 compressor circuit codes coming up , is that the compressor shot then as all fuses good and fl60 fuse hasn't blown I've touched no wiring anywhere at all , any help where to start is greatly appreciated thanks all ,tony

 

S

Shedload

Well-Known Member

• Feb 11, 2025

• #2

My first thought is you may have jacked car up on the compressor and caused some damage.
It is a black box on RHS about half way along.

 

L

Liverghouls

Member

• Feb 11, 2025

• #3

Shedload said:

My first thought is you may have jacked car up on the compressor and caused some damage.
It is a black box on RHS about half way along.

Click to expand...

Hi and thanks for getting back to me , no definitely wouldn't do that but I could see where your coming from some people may actually do this , I used the jack point it just stopped working after I'd dropped car off jack and then suspension fault appeared no suspension compressor working very strange, also do you know why the Chinese compressor is so noisy I was reading about them today and they're apparently loud ? Best wishes Tony

 

S

Shedload

Well-Known Member

• Feb 12, 2025

• #4

No idea about Chinese compressor but they are not known as -
Chinese Replacement Auto Parts for nothing !
I did think it could possibly be a fault with one of the height sensors but don't know why that would stop the compressor working.
Have you tried raising using the extra height button on dash ? After that try battery reset.

 

marjon

Well-Known Member

Full Member

• Feb 12, 2025

• #5

I had a look at those codes relating to the L322 ( i assume they would be the same)
They seem to relate to an electrical issue more than anything else.

I could go back and find them later if you would like, But as what I have is for the L322 (athough I would image they would use the same codes).

J