FlyingPete

FlyingPete

Well-Known Member
I'm after a pair of extra high-beam lights to go on my 90, or possibly one high beam (directly in front of the driver) and one fog light (in the corresponding place on the other side.) I'm thinking of mounting them onto the top of the bumper rather than to an a-bar etc. But I'm not sure whether round or rectangular lights would look better fitted in this way. With an a-bar, two 7-inch round ones seem to look best as they sort of match the standard headlights, but I wonder if the proportions of the rectangular ones would better suit bumper mounting.

So what lights have you all got? :D
 
i have neither. The issue is square - the rest of the whole dam car is square lets face it - nice look

Round - all the actual lights are round. Which part of your OCD will hurt the least?
 
I think they are all shat.
Go rusty
Keep coming loose
Get in the way of fixing stuff.
An generally drop orf.
 
@FlyingPete As promised

DSC_0503_zpswj8llkrh.jpg
 
Saw a series 3 go past today with a pair of small round lights (probably 5 3/4" ones) on the front bumper, pretty much in line with the chassis rails. Looked good and I think this is the way to go. Not yet decided between a pair of spots or one spot and one fog.
 
FlyingPete said:
I'm after a pair of extra high-beam lights to go on my 90, or possibly one high beam (directly in front of the driver) and one fog light (in the corresponding place on the other side.) I'm thinking of mounting them onto the top of the bumper rather than to an a-bar etc. But I'm not sure whether round or rectangular lights would look better fitted in this way. With an a-bar, two 7-inch round ones seem to look best as they sort of match the standard headlights, but I wonder if the proportions of the rectangular ones would better suit bumper mounting.

So what lights have you all got? :D
Click to expand...
Why do you want any?
 
Ebayed a mixed pair of Raydyot lights- one fog, one spot- that appear to be new-old stock from the 80s. Experimenting a bit with positioning- there are a couple of existing holes in the bumper that I'll probably make use of, and I suspect that this is where a previous owner had some lights as there was some (bodged, hastily removed) wiring under the bonnet when I bought the 90. Otherwise I may space them out slightly so they're in line with the chassis rails. I might give the fog light lens the yellow glass treatment with some stained glass paint for a classic look, but not decided yet.
DSC00048.JPG
 
FlyingPete said:
Ebayed a mixed pair of Raydyot lights- one fog, one spot- that appear to be new-old stock from the 80s. Experimenting a bit with positioning- there are a couple of existing holes in the bumper that I'll probably make use of, and I suspect that this is where a previous owner had some lights as there was some (bodged, hastily removed) wiring under the bonnet when I bought the 90. Otherwise I may space them out slightly so they're in line with the chassis rails. I might give the fog light lens the yellow glass treatment with some stained glass paint for a classic look, but not decided yet.
View attachment 101441
Click to expand...
I can't work out if your reg is short for fuck or wank?
 
You must log in or register to reply here.

Similar threads

D
Bumper removal and spotlight question
Replies
14
Views
1K
Anaconda
A
S
1988 90 replacing lights with LEDs and have lots of questions
Replies
5
Views
860
sleepybear
S
M
2003 mark1 TD4 Automatic. Round Headlights
Replies
11
Views
1K
300bhp/ton
300bhp/ton
malcolm_durant
RESOLVED: Early Freelander 1: dash-mounted cupholder - retaining "locknut" part number or equivalent?
Replies
4
Views
534
Nodge68
Nodge68
Kingshill-Rover
Series 3 LWB in Buckinghamshire - Front Springs
Replies
11
Views
952
Rangieman123
Rangieman123