StuRox
Well-Known Member
Speaking of lights, does anyone have any access to a Toyota Hilux - around the 3003 model, as reckon their headlights could be made to fit, as I am sick of having to feed the goldfish in my headlights...so have now been looking at something like this...
which is from this model....
But not sure if they are flat fronted or slope up from the bottom and also if they are too curved?
which is from this model....
But not sure if they are flat fronted or slope up from the bottom and also if they are too curved?
StuRox
Well-Known Member
Well, got the lights finished this weekend, as I needed to extend the bumper under the lights so they didn't just look like they were 'stuck on' and not meant to be there.
Started by making up some bottom bumper brackets..
then welded them onto the bumper...
then added some seal sealer...
and the finished look...
A lot better in my opinion
Started by making up some bottom bumper brackets..
then welded them onto the bumper...
then added some seal sealer...
and the finished look...
A lot better in my opinion
StuRox
Well-Known Member
Then onto some light guards.
Started by bending into the shape I needed...
then welded onto some of the metal I had left over from the bumper...
and then a trial fit...
a few coats of hammerite...
and then fitted up using rivnuts into the bumper....
not sticking out too much and you can see the new under protection...
and jobs done...
Not bad for £35.00 for the lights and £5.00 for the steel, oh and a few weekends fabricating them on
Started by bending into the shape I needed...
then welded onto some of the metal I had left over from the bumper...
and then a trial fit...
a few coats of hammerite...
and then fitted up using rivnuts into the bumper....
not sticking out too much and you can see the new under protection...
and jobs done...
Not bad for £35.00 for the lights and £5.00 for the steel, oh and a few weekends fabricating them on
ShaunPDisco
Active Member
How long did the wiring take.....might have a go doing these myself!!!
StuRox
Well-Known Member
Not bad for £35.00 for the lights and £5.00 for the steel, oh and a few weekends fabricating them on
Even better, I have just sold the dash switch that came in the kit for £25.00 so costs now down to £15.00
discoverydti
Member
Just a heads up they will fit a face lift D2 a few guys on another forum have fitted them, so I've ordered a set today
ShaunPDisco
Active Member
Well as I have a rare day off next week from Daddy Day care decided to spend before it is earned o a set for my D1. Think I will need to get a set of clear indicators as cant afford to go facelift lights unless lottery numbers come up!!!
