A

Ash34

Member

• May 8, 2017

• #1

Ok so i need to replace the bulk head outriggers problem being there that rotten and been patched so many times they appear bent. Going to buy some new ones but does anyone know what the original measurements should be for reference to get a factory fit for when I fit the new ones? Tia

 

Attachments

• 
  20161008_144959.jpg

  251.3 KB · Views: 265

neilly

Well-Known Member

• May 8, 2017

• #2

@Ash34


Not sure exactly what you want , but the chassis dimensions are given in the Rave manual.

Cheers

 

Gmacz

Well-Known Member

• May 8, 2017

• #3

Put the long bolt in the outrigger and nip it up. Outrigger now in the right place, weld away. This is how i did my previous 110.

 

Ian Maycock

Well-Known Member

• May 8, 2017

• #4

Same here cut old one off with a plasma cutter bolted new one to bulkhead I did put a trolley jack under the end( a pillar) before I began just in case it dropped.

 

A

Ash34

Member

• May 8, 2017

• #5

Ian Maycock said:

Same here cut old one off with a plasma cutter bolted new one to bulkhead I did put a trolley jack under the end( a pillar) before I began just in case it dropped.

Click to expand...

As it's already stripped there's nothing to attach anything to if that makes any sense. The reason I need measurements is to my eye it looks like it has already dropped and twisted down.

 

Attachments

• 
  20170506_171938.jpg

  388.1 KB · Views: 786

Gmacz

Well-Known Member

• May 8, 2017

• #6

First pic had body on it, you sneaked it off.
Were the door gaps ok, if they were then the outrigger is in proper place. Only thing that matters is the bolt lines up when you put it back.

 

Ian Maycock

Well-Known Member

• May 8, 2017

• #7

That was sneaky they're at the end of the pages in this link http://www.landroverweb.com/Pdf-files/Manuals/Defender-90-110-workshop-manual-4.pdf .

 

A

Ash34

Member

• May 8, 2017

• #8

Lol door gaps! All The doors where probably a week from falling off on there own lol the steel frame below the windows didn't exist the only thing left was the plastic inner panel and outer Ali skin! So I can't make a good call on that I'm afraid thank you for all the assistance though!