MeatCleaverX86
Active Member
MUDSTUFF.CO.UK - Have you got MUD? - Land Rover Solutions do a bulkhead removaly bar for £90 that will let ya put you seat much further back (welder and scafold bar could probally do the same job
ormus
New Member
quote:
MUD Rails are NOT a length of steel box-section. Each rail is fabricated using computerised laser-cutting and folding techniques before being powder-coated in a satin black finish to match the existing seat frames. The seat frames bolt back down into the rail using the captive threaded inserts incorporated within the design.
yeh right.
MUD Rails are NOT a length of steel box-section. Each rail is fabricated using computerised laser-cutting and folding techniques before being powder-coated in a satin black finish to match the existing seat frames. The seat frames bolt back down into the rail using the captive threaded inserts incorporated within the design.
yeh right.
landroversforever
Active Member
the mud rails are a piece of pi** to fit, i did it on work experience. im 6' 2'' and i think they made it easier to fit in.
I am 6'5" and have no problems with the driving position after I fitted a few mods from mud stuff. If you have a rear bulk head they supply a bulkhead removal bar. This allows you to cut away the top section of the rear bulkhead so allowing the seats to be placed further back and reclined. The bar is then fitted to provide the strength back. The other mod I fitted was the seat bars from Mud Stuff.They fit between the seat rails and the seat box so allowing the seat to be placed further back.
The whole job took about half a day and it has made a such a difference.
The whole job took about half a day and it has made a such a difference.
